SLA machines to provide the best possible quality of the raw parts. Base pieces are in plastic. Color of raw parts may vary.Sanding and fine tuning of parts is required. Finishing and painting is required. Some Parts may contain remnants of resin supports that require sanding, These supports are used in the printing process and are mostly cleaned in the QC and packing process however some can remain occasionally. Some resolution lines may be visible on the raw resin surface. These lines will vanish with the proper priming of the resin prior to paint. Finishing recommendations for best results. Prime with a "high build" sandable primer. Putty or Bondo needed areas or seams with filler before final application of paints.
This option does not work in mobile format, web only.