Putty or Bondo needed areas or seams with filler before final application of paints. Prime with a "high build" sand able primer is recommended. Certain "Self Leveling" primers can accentuate the print marks, (Tamiya Fine, Badger Stynilrez).Paint with your choice of medium, Acrylics, lacquers, Oils are all acceptable once primed. Do not expose to extreme heat locations, excess of 100 degrees F, Do not expose to alcohol based products for extended amounts of time, as alcohol will break down the resin. Do not expose to extreme sunlight, or excessive UV. Photopolymer resins are UV curing, over exposure can break product down. That is right, ALL of our items have been printed, test assembled and then photographed for FULL transparency. With more than 6 years of experience, please place your trust in us. Color of raw parts may vary. Sanding and fine tuning of parts is required. Finishing and painting is required. Some Parts may contain remnants of resin supports that require sanding, These supports are used in the printing process and are mostly cleaned in the QC and packing process however some can remain occasionally. Some resolution lines may be visible on the raw resin surface. These lines will vanish with the proper priming of the resin prior to paint. This option does not work in mobile format, web only. This item is in the category "Toys & Hobbies\Models & Kits\Figures". The seller is "ny3dcreations" and is located in this country: US. This item can be shipped worldwide.